Kervay Digital Carbon Monoxide Detector for Test CO Gas Leak

  • ₱1,300.00


  • A perfect item for protecting your family from the dangers of carbon monoxide
  • *This alarm is highly recommended to be mounted on a wall surface
  • *Advanced level of protection, easy to read with the digital display, even in low light conditions
  • *Displays the level of carbon monoxide the unit is sensing
  • *Green LED: Flashes every 30 seconds to indicate the unit is operating properly. The green LED will also flash before     CO reading is taken and when any button is pressed.
  • *Red LED : When a dangerous level of carbon monoxide is detected the red LED will pulse and a loud alarm pattern will    sound. The carbon monoxide alarm pattern is 4 short beeps, followed by 5 seconds of silence, followed by 4 short     beeps with a corresponding red LED flash. This cycle will continue for 4 minutes and then change to 1 cycle every   minute until the device is reset or the CO is eliminated.
  • *Test/Reset button is designed for weekly testing if it works properly
  •   and reset the unit during CO alarm
  • *Alerts users when batteries needs to be replaced
  • *Compact, lightweight & easy to operate
  • *Chirp every 30s with green LED out and Err on LCD
  • *Power consumption: 0.3mW
  • *Size: 100mm*100mm*35cm
  • *Powered By: 3 x AA Batteries (Not included)

Parameters:

  • Within 10~40 minutes at 100ppm CO concentration;
  • Within 3 minutes at 300ppm CO concentration
  • Audibility: 85dB ( at 1m distance ), Frequency 3-0.5KHZ
  • Standby Mode: Green Led flashes once every 30 seconds
  • Alarm Mode : Red Led quickly flashes 4 times with unit chirping every 5 seconds, then repeat,
  • Low-bat Indicator:Chirp every 30s as battery lower than 3.3V with green LED flashing and Lb on LCD
  • Within 60~90 minutes at 50ppm CO concentration;
  • Standby Current: <50μA
  • Alarm Current: <50mA
  • LCD Displayer (optional): 4 digits LCD displayer
Sale

Unavailable

Sold Out